PF Series Impact Crusher

PF Series Impact Crusher

Absorb advanced technology at home and abroad, the zenith of PF Series Impact Crusher can easily meet these requirements in the domestic mining mining conditions.PF series impact crusher discharge size adjustable, broken specification is diverse.The user can adjust the gap between the hammer and the impact plate and the matching parts need to be perfect output size.Incomparable excellent performance, the results showed that the zenith PF series impact crusher performed well in the secondary crushing, tertiary crushing and material recovery.

Detailed introduction

Technical features and advantages

  • 1. High efficiency and energy conservation;
  • 2. No-board connection;
  • 3. Chrome hammer and special impact plate;
  • 4. Cubical shape of final product and the output size is adjustable;
  • 5. Easy maintenance.

Impact Crusher Installation Instructions

The machine is supplied by the manufacturer after assembly, when the user receives the machine, the machine should be checked in order to eliminate the possible defects in the transport process.

1, this manual only includes the impact crusher special installation instructions, the rest can be general machine installation procedures for general installation.

2, the installation of impact crusher site, the need for lifting equipment, so that the machine installation, maintenance use. Its lifting equipment, lifting capacity by table selection.

3, machine installation

  • ⑴, impact crusher can be installed on the basis of reinforced concrete, can also be installed on the steel frame.
  • ⑵, the basis of height, depth and size should be installed according to the site geological conditions, designed separately, the machine installation dimensions can refer to the reference map.
  • ⑶, the base should have enough space in the lower part of the installation of transport equipment and equipment maintenance.
  • ⑷, in order to reduce the vibration, the machine and the foundation should be pad to absorb vibration material.
  • ⑸, the local installation level error of not more than 0.5 mm / m.
  • ⑹, the local drive belt wheel mounted on the left and right can be, the base reference map and the direction of the host drive are specified as the horizontal face of the feed when the left factory, according to the specific circumstances installed in the opposite position should also be the corresponding changes.
  • ⑺, the transmission part according to the direction of transmission and supporting position by the user-owned protective cover; feed port should be based on receiving materials and supporting the relationship between the user to set up their own effective hopper to ensure the use of safety.

Impact Crusher Instructions

1, before the start of the preparatory work

  • (1), check the bearing with the right amount of effective grease.
  • (2), check the activities of the joints should not be stuck phenomenon, and coated with the right amount of grease.
  • (3), check that all fasteners should be fully tightened.
  • (4), check the body should not be broken easily debris.
  • (5), check the gap between the backing plate and the rotor plate hammer should meet the requirements.
  • (6), hand rotation of the rotor to observe the assembly of their parts should be reliable, normal, plate hammer and other parts shall not have a collision phenomenon.

2, impact crusher start

  • (1), after inspection, to prove the normal parts of the machine in order to start under no-load.
  • (2), such as start after the discovery of abnormal phenomenon, should immediately stop, must identify the cause, and eliminate it before starting again.

3, feeding

The machine must be fed with the feeding device evenly, and the feed evenly distributed in the rotor part of the full length of the work, so that is to ensure a balanced production, to avoid blocking materials and stuffy car phenomenon, but also extend the service life of the machine.

The electrical control system of the feeding device should be interlocked with the electrical control system of the impact crusher. When the impact crusher overload, the feeding device can automatically cut off the power, stop feeding.

4, the adjustment of the discharge gap

When the user needs to adjust the nesting gap, the gap adjustment device can be used to adjust the nesting gap. When adjusting, first loosen the screw sleeve, then turn the adjustment nut, when adjusted to meet the requirements, and then tighten the screw sleeve.

Under normal circumstances, the former counter-plate and the plate hammer of the largest gap, followed by the counter-plate gap, the gap is the smallest gap between the size of the situation, you can open the shelf by the upper side of the observation door. Users must pay special attention to the above work must be carried out after the shutdown, in order to avoid accidents.

5, impact crusher downtime

Impact crusher should stop feeding before stopping, until the material within the crushing chamber after the row, before stopping.

Impact Crusher Safety Requirements

  • 1, the local operators to be safe, technical education and other professional training can be posts, posts should be relatively stable.
  • 2, the machine is running, the staff can not stand in the inertial force within the scope of the line, the installation of electrical switches have to avoid this position.
  • 3, the machine is running, it is strictly prohibited to open the door to check the machine inside the situation, is strictly prohibited any adjustments, cleaning and maintenance work, so as to avoid danger.
  • 4, is strictly prohibited metal blocks and can not break the material into the crushing chamber, and protective measures to avoid damage to the machine.
  • 5, the machine in the maintenance, the first should be cut off the power, and in the dangerous location should be warning signs.
  • 6, electrical appliances, control equipment should be sensitive, matching, and should be grounded, the wire should be supporting, reliable, insulated, and installed in the snake hose.
  • 7, the proposed machine with mechanical feeding material to reduce the labor stress, improve the safety factor, increase the output when Taiwan. If the machine and other equipment supporting the application, the individual equipment should be adjusted to achieve the most economical package.
  • 8, the operating site should have adequate lighting facilities, the operator should have protective equipment and protective measures.
  • 9, the user according to the actual situation to develop, including safety, operation, control, electrical, installation, maintenance and other personnel of the safe operating procedures, responsibility and transfer system.

Technical data

Model Rotor Φ×L (mm) Feed Opening (mm) Max Feeding (mm) Capacity (t/h) Power (kw) Motor Model Machine Size (mm)
PF1010 Φ1000×1050 400×1080 350 50-80 4-75 Y280S-4/75 2455×2086×2800
PF1210 Φ1250×1050 400×1080 350 60-120 6-110 Y315L1-6/110 2590×2050×2810
PF1214 Φ1250×1400 400×1430 350 80-160 6-132 Y315L2-6/132 2590×2400×2810
PF1315 Φ1300×1500 860×1520 350 120-260 6-200 Y355M3-6/200 2930×2760×3050


Simply complete the form below, click submit, you will get the price list and a Zenith representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).